Skip to main content

1.3: Converting to Different Base Systems

  ↵

 Learning Objectives
  1. Convert base ten to different bases.
  2. Convert different bases to base ten.

Introduction and Basic

During the previous discussions, we have been referring to positional base systems. In this chapter, we will explore exactly what a base system is and what it means if a system is “positional.” We will do so by first examining our familiar base-ten system and then expanding our exploration by considering other possible base systems. 

A base system is a structure within which we count. The easiest way to describe a base system is to think about our own base-ten system. The base-ten system, which we call the “decimal” system, requires a total of ten different symbols/digits to write any number. They are, of course,

The decimal system is also an example of a positional base system, which means that the position of a digit gives its place value. Not all civilizations had a positional system, even though they did have a base with which they worked.

In our base-ten system, a number like has meaning to us because we are familiar with the system and its places. As we know, there are six ones since there is a in the ones' place. Likewise, there are seven hundred thousand since the reside in that place. Each digit has a value explicitly determined by its position within the number. We distinguish between a digit, a symbol such as and a number, which comprises one or more digits. We can take this number and assign each of its digits a value. One way to do this is with a table, which follows:

The third column in the table shows that each place is simply a multiple of ten. Of course, this makes sense, given that our base is ten. The digits that are multiplying each place tell us how many of that place we have. We are restricted to having at most in any one place before we have to “carry” over to the next place. We cannot, for example, have in the hundreds place. Instead, we would carry to the thousands place and retain in the hundreds place. This comes as no surprise to us since we readily see that hundreds is the same as one thousand, one hundred. Carrying is a pretty typical occurrence in a base system.

However, base ten is not the only option we have. Practically any positive integer greater than or equal to can be used as a base for a number system. Such systems can work just like the decimal system, except the number of symbols will differ, and each position will depend on the base itself.

Other Bases

For example, let’s suppose we adopt a base-five system. The only modern digits we would need for this system are and What are the place values in such a system? To answer that, we start with the ones place, as most base systems do. However, if we were to count in this system, we could only get to four () before we had to jump up to the next place. Our base is after all! What is the next place that we would jump to? It would not be tens since we are no longer in base ten. We’re in a different numerical world. As the base-ten system progresses from 100 to 101, so the base-five system moves from  to   Thus, we move from the ones to the fives.

After the fives, we would move to the place, or the twenty-fives. Note that in base-ten, we would have gone from the tens to the hundreds, which is, of course,

Let’s take an example and build a table. Consider the number in base five. We will write this as where the subscript is not part of the number but indicates the base we’re using. First off, note that this is NOT the number “thirty thousand, four hundred twelve.” We must be careful not to impose the base-ten system on this number.

How to read a number in other bases?

You must read as "three-zero-four-one-two" in base 5". Do not read as thirty thousand four hundred and twelve.

Place Values and Digits Used in Other Bases
Place Value and Digits Used in Other Bases

The digits used in any base, can not reach For example, the digits used in the base are And the place values in base are the power of . Note that

Place values in different bases
Base Digit symbols Place Value
Be Careful!

It's important to use only the allowed digits for a given base. For example, in a base system, we can only use the symbols and Therefore, we cannot write , because the digit is not valid in base

Also, you do not need to specify the base for the base number. For example,

Example : Identify the place value of a digit in other bases

What is the place value of the digit in each number below?

  1.  
Answer
Your Turn : Identify Bases

Converting Other Bases to Base 10

To convert a number from any base to base you need to understand how numbers are represented in different bases. In base each digit has a place value as a power of . The step to convert to base from other bases is summarized below.

Steps to Convert Other Bases to Base 10
  1. Identify the place value of each digit in the given base.

  2. Multiply each digit by its corresponding place value.

  3. Add (sum) the results from Step 2 to obtain the number in base 10.

The following diagram illustrates the given diagram.

This image show how to convert  Other bases to base 10.

Example : Convert Other Bases to Base Ten
  1.  Convert to a base number.
  2. Convert the base-seven number to base
Answer 1
Answer 2
Example : Convert Other Bases to Base Ten
  1. Convert Convert to a base number.
  2. Convert to base
Answer 1
 
Answer 2
Your Turn : Covert Other Bases to Base Ten

Converting Base Ten to Other Bases

Converting from an unfamiliar base to a familiar decimal system is not that difficult once you get the hang of it. It’s only a matter of identifying each place and multiplying each digit by the appropriate power. However, going the other direction can be a little trickier. Suppose you have a base-ten number and want to convert it to base-five. Let’s start with some simple examples before we get to a more complicated one.

Steps to Convert Base 10 to Other Bases
  1. Find the highest power of the base that will divide into the given number at least once, and then divide.
  2. Write down the whole number part, then use the remainder from the division in the next step.
  3. Repeat step two, dividing by the next highest power of the base , writing down the whole number part (including ), and using the remainder in the next step.
  4. Continue until the remainder is smaller than the base. This last remainder will be in the “ones” place.
  5. Collect all your whole-number parts and the last remainder to get your number in base notation.

Note: You do not need to use place value in the division process. The above step is illustrated in the following diagram.

This image shows how to convert base 10 to other bases.

In the given chart, we see the base- representation of the base- number.

For example: ,  ,  , , and so on. 

This chart shows equivalent first 22 base ten  number to  base 5 number.

Figure : Base  number chart
Example : Convert Base 10 to Other Bases
  1. Convert the base-ten number to a base-five number.
  2. Convert the base-ten number to a base-two number.
  3. Convert the base-ten number to a base-nine number.
Answer 1
Answer 2
Answer 3
Your Turn : Convert Base 10 to Other Bases
Example : Convert Base 10 to Other Bases
  1. Convert base number to a base four number.
  2. Convert base number to a base five number.
Answer 1
Answer 2
Your Turn : Convert Base 10 to Other Bases

Working on the Bases Higher Than Ten.

Using Base

As mentioned in the text, working in base is mathematically awkward. Ten has only two natural number divisors: and This means dividing into groups is not easy. However, or a dozen, has more divisors: and The Dozenal Society recognizes this more mathematically pleasant detail. It advocates for a switch to using base for numbers. Their argument is based on the divisibility of the number But has there ever been a society that used such a system? The answer is yes. A dialect of the Gwandara language in Nigeria uses the base system. It is unlikely, though, that the Dozenal Society will achieve their goal, as the base system is so entrenched in our society.

A number base higher than ten and less than or equal to sixteen includes systems like base- through base- which use additional symbols beyond the standard digits 0 to To represent values greater than these systems introduce letters from the alphabet, starting with A for B for C for D for E for and F for in base- (hexadecimal). These bases are especially useful in fields like computer science and digital electronics. For example, hexadecimal (base-16) is commonly used to simplify binary code since each hex digit represents four binary digits (bits). These number systems allow for more compact and human-readable representations of data, making them practical for tasks such as memory addressing, color codes in web design, and machine-level programming.

Place values and digits used in bases higher than 10 up to base 16
Bases Digits Used Place Values
Example : Convert Base Sixteen to Base Ten

Convert into base

Answer
Your Turn : Convert Base Sixteen to Base Ten
  • Was this article helpful?
Complete your gift to make an impact